Downloads At a Glance
  • Benefits of the WaterMax™ 5000 Pumping Station: 

  • Customizable through a broad range of options
  • Energy-efficient VFD system provides surge-free soft start
  • Advanced, user-friend monitoring and control
  • Performance tested prior to delivery
  • Delivered as a factory-assembled unit for fast installation
  • One year limited warranty against defective materials or workmanship

WaterMax 5000

The Efficient Pumping System for up to 400 GPM 
 
The WaterMax™ Series 5000 is a prefabricated, self-enclosed pump station with Variable Frequency Drive (VFD) technology to provide smooth, accurate, surge-free, and energy efficient performance at varying flow rates.    
 
The 5000 offers  precise and reliable pumping power for various water sources including lakes, ponds, boosted city supply, or harvested water.  Our rugged 5000 is skid mounted, prefabricated, and self-contained and is offered in custom engineered suction lift, flooded suction, submersible, and booster models.  

  • Flows up to 400 GPM or 140 PSI
  • Motor range is 3 to 30 HP
  • Voltages options include 240/1 phase; 208/3 phase; 240/3 phase; and 480/3 phase
    •  
    Standard Features: 

  • NEMA 3R service-rated main disconnect
  • U.L. listed control panel
  • VFD pressure regulation with surge-free soft starting
  • Multi-line operator interface display
  • Alarms: low pressure shutdown; high pressure shutdown; VFD fault shutdown; high pump temperature shutdown; motor overload shutdown; phase loss (3 phase only)
  • Lightning surge protection
  • Pressure drop starting
  • Stainless steel pressure transducer
  • Flow sensor
  • Pump construction features include a bronze impeller and a cast iron volute with back pullout design
  • Discharge isolation valve
  • Priming port for suction lift application
  • Positive prime assembly on lift application
  • Foot valve for lift application
  • Engineered, forced air cooled, 14-gauge steel enclosure with lockable lid
  • Powder coat or baked polyurethane industrial finish on enclosure & base
  • Industrial grade pipe coating system
  • Stainless steel fasteners
    •  
    Available Options: 

  • Choice of sandstone or green color options
  • Full flow bypass line with three isolation valves
  • Suction & discharge drop pipes
  • Floating intake suction pipe assembly with foot valve
  • Stainless steel or marine-grade aluminum enclosure
  • Internal sound dampening insulation
  • Dead-front service disconnect panel
  • Thermostatically controlled enclosure heater
  • 24-volt controller start (up to 3 additional)
  • Flow start (booster application only)
  • Vandal resistant alarm light

    • WaterMax™ enclosures are finished with rust-inhibitive coatings, a baked epoxy prime coat, and a two-part UV-insensitive polyurethane. 

    5000 Applications: Suction lift, flooded intake, or boost forlakes, pond-supplied estate systems, boosted city supplies and more.